Maintenance and accessories for composite tanks

We manufacture tank container accessories, which can also be purchased for your existing tank solutions. We can also take care of all your tank maintenance, spare parts and accessories.

Maintenance and Parts for Tank Equipment

Do you need maintenance, a replacement part, or a new accessory for your tank? We service composite tanks and supply compatible parts for them. We also manufacture add-ons for existing tank solutions.

Spare parts catalogue

Admor Composites supplies spare parts and accessories for chemical tanks and transport equipment - from valves to seals and camlock fittings. All parts are designed to withstand the demands of chemical logistics and to be compatible with composite structures.

Camlock connectors

  • K00380 Camlock connector 3″, ECTFE coated
  • K00159 Camlock connector, ECTFE (Halar) + camlock cap 3″, PTFE or EPDM gasket
  • K00325 Camlock cover PP 3″, EPDM gasket, other options on request
  • K00447 Camlock cover RST 3″, EPDM gasket

Seals

  • K00180 Gasket DN80, CNAF/PTFE, 200×120×80 mm, thickness 2,5 mm, 8×Ø18 mm / PCD160
  • K00355 Gasket DN80, CNAF/PTFE, 176×126×82 mm, thickness 2,5 mm, 4×Ø18 mm / PCD160
  • K00112 Male hatch seal, EPDM, ID490×14×14 mm

Valves

  • K00154 Butterfly valve DN80, PTFE lined
  • K00161 Bottom valve kit 45°, manual 3″, ECTFE (Halar) coated
  • K00333 Bottom valve kit 45°, manual 3″, extended, ECTFE (Halar) coated
  • K00162 Safety relief valve 3″, ECTFE (Halar) coated, set pressure 2,2 / -0,21 bar
  • T80004 Safety relief valve 1″ RST, pressure 2 bar
  • K00376 Ball valve ABS, DN15-DN50

Male hatch parts

  • K00176 Male Hatch Eye Screw 19×91 mm, Aisi304
  • K00178 Male hatch wing nut M20, with Admor logo
  • K00179 Man's claw, Aisi316
  • K40000 LM / K60000 ECTFE Male hatch cover

Other equipment

  • K00144 Hinge for jar lid, black plastic 23 mm (specify length when ordering)
  • K00357 Perolo 3″ DN80 coated converter Ø114 / Ø80
  • K00364 Weather cover folding, hinged, length 1300 mm
  • K00459 Discharge pipe drain spacer with 1″ ABS ball valve, to be installed between DN80 butterfly valve and camlock
  • K00262 Wash tube 3″ for camlock connection, PP/PTFE, rotating wash balloon
  • K00389 Detachable washing hose, PP/PTFE, rotating washing balloon, hose and pen connector 1″

Male hatch cover (composite)

The manhole cover (500 mm diameter, with 6 or 8 swivel bolts) can also be supplied for existing tank solutions such as tank containers, tank trucks, trailers and removable tanks. In this way, the benefits of the composite material - chemical resistance, durability, lightness, energy efficiency, cleanability, food grade - enhance the properties of the existing tank.

Model
ADR / RID / EN13314

Diameter
500 mm

Hatch thickness
31 mm / 80 mm

Anchor points
6 or 8

Operating pressure
2 bar / 4 bar

Test pressure
4 bar / 6 bar

Printed from
9 kg (2 bar)
10 kg (4 bar)

Operating temperature
-40 - +100 °C

Thermal insulation
40 W (∆t 60 °C)

Structure
CFRP (carbon fibre reinforced plastic) + ECTFE fluoroplastic lining

Eriste
Foam

Collar
FRP (500 mm × 30 mm)

Clips
304 and 316 stainless steel

Seal
EPDM sealing ring

Approvals
Dekra / ADR / RID / EN13314

Benefits of a manhole cover

Excellent chemical resistance

50% lighter, but more durable than a steel hatch

100 times better energy efficiency than steel cylinders

Compatible with steel collar